Vocal EQ is a subject most engineers have struggled with.
Since the vocal sound is such an important part of the mix, no wonder it keeps you up at night.
You want just the perfect sounding EQ curve. Thickness and clarity without muddiness.
So here are 5 steps for dealing with muddiness when you're mixing your next vocal track.
1. Filtering
Sometimes you don't need to surgically cut out the lower mids to clear up the muddiness in the vocals. Sometimes you just need to get a little heavy-handed on the high-pass filter.
2. Nasal Sound
If there's one pet peeve I have with vocals, it's the nasally sound caused by too much 1 kHz. But the weird thing is, you can't always just cut the
frequency to get rid of the nasal sound.
That creates a thin sound that's exactly the opposite of what you want. And if you have too much low-mid buildup in your vocal, it will even harder to get that vocal on the right track, no pun intended.
3. Masking
When that nasally sound happens, masking is a good way to hide a certain sound. By boosting slightly above the frequency that's
causing problems you can often hide the sound you're having trouble with.
4. Weight
Being scared
of muddiness can also cause other problems. You might be avoiding certain frequency ranges because of their reputation for causing muddiness. But then you might end up with a thin sounding vocal. Don't be scared to boost the vocals in the lower-mids if your singer is sounding a little thin. Sometimes that's exactly what a vocal needs.
5. Presence
If you're not having any problems with muddiness, but the vocal doesn't seem to stand out, boosting the higher mids can sometimes save the sound. Subtractive EQ is great and all, but sometimes you just want to smack some 5 kHz
on there.
Conclusion
Too much low-mid build up does cause muddiness in your vocals but it's not always a matter of cutting a frequency and leaving it at that. The frequency spectrum is a complicated web of frequencies that all relate to each other.
Cutting one frequency has relative
consequences to all the other ones. If you cut the low-mids, the relative gain of the high-mids is increased so carefully navigating the frequency range to get the best sounding vocal sound is tricky.
Lucky for you, I've got just the thing. Your Ultimate EQ Guide goes over all the characteristics of each frequency range with dedicated guides to drums, bass, guitars and other stringed instruments, brass and orchestral part and...most importantly...vocals.
Check it out here:
www.EQStrategies.net
P.S.
Check out how far the EQ guide has come throughout the years!?!
This is the first cover I made when I first published it. Damn, that's ugly!
